Appearance

Celestia-node RPC CLI tutorial ​

In this tutorial, we will cover how to use the celestia-node RPC API to submit and retrieve data (blobs) from the data availability layer by their namespace.

Introduction ​

Blobs ​

Data is posted to Celestia's DA layer by using MsgPayForBlobs transactions to the core network. Read more about MsgPayForBlobs.

Namespaces ​

Celestia partitions the block data into multiple namespaces, one for every application. This allows applications to only download their data, and not the data of other applications. Read more about Namespaced Merkle trees (NMTs).

TIP

If you already have a running and funded node, you can skip to the RPC CLI guide section.

If you would like to skip syncing, you can use this guide to sync from trusted hash and height.

WARNING

The gateway endpoints have been deprecated and will be removed in the future. If you would like to use them anyway, you can find more details on GitHub.

Hardware requirements ​

The following minimum hardware requirements are recommended for running a light node:

  • Memory: 500 MB RAM (minimum)
  • CPU: Single Core
  • Disk: 50 GB SSD Storage
  • Bandwidth: 56 Kbps for Download/56 Kbps for Upload

Setting up dependencies ​

Install dependencies and celestia-node if you have not already.

Instantiate a Celestia light node ​

Now, let's instantiate a Celestia Light node:

TIP

RPC endpoints are exposed in all celestia-node types such as light, bridge and full nodes.

bash
celestia light init
celestia light init
bash
celestia light init --p2p.network mocha
celestia light init --p2p.network mocha
bash
celestia light init --p2p.network arabica
celestia light init --p2p.network arabica

Instantiating (or initializing) the node means setting up a node store on your machine. This is where the data and your keys will be stored.

Connect to a core endpoint ​

Let's now run the Celestia Light node with a gRPC connection to an example core endpoint. Connecting to a core endpoint provides the light node with access to state queries (reading balances, submitting transactions, and other state-related queries).

Note: You are also encouraged to find an RPC endpoint for Mainnet Beta, Mocha testnet, or Arabica devnet. If you are running a production application, use a production endpoint.

bash
celestia light start --core.ip <URI>
celestia light start --core.ip <URI>
bash
celestia light start --core.ip <URI> --p2p.network mocha
celestia light start --core.ip <URI> --p2p.network mocha
bash
celestia light start --core.ip <URI> --p2p.network arabica
celestia light start --core.ip <URI> --p2p.network arabica

TIP

The --core.ip gRPC port defaults to 9090, so if you do not specify it in the command line, it will default to that port. You can add the port after the IP address or use the --core.grpc.port flag to specify another port if you prefer.

Refer to the ports section of the celestia-node troubleshooting page for information on which ports are required to be open on your machine.

For example, your command along with an RPC endpoint might look like this:

bash
celestia light start --core.ip consensus.lunaroasis.net
celestia light start --core.ip consensus.lunaroasis.net
bash
celestia light start --core.ip rpc-mocha.pops.one --p2p.network mocha
celestia light start --core.ip rpc-mocha.pops.one --p2p.network mocha
bash
celestia light start --core.ip validator-1.celestia-arabica-11.com \
  --p2p.network arabica
celestia light start --core.ip validator-1.celestia-arabica-11.com \
  --p2p.network arabica

Keys and wallets ​

You can create your key for your node by running the following command from the celestia-node directory:

TIP

You do not need to declare a network for Mainnet Beta. Refer to the chain ID section on the troubleshooting page for more information

bash
./cel-key add <key-name> --keyring-backend test --node.type light \
  --p2p.network <network>
./cel-key add <key-name> --keyring-backend test --node.type light \
  --p2p.network <network>

You can start your light node with the key created by running the following command:

bash
celestia light start --core.ip <URI> --keyring.keyname <key-name>
celestia light start --core.ip <URI> --keyring.keyname <key-name>
bash
celestia light start --core.ip <URI> --keyring.keyname <key-name> \
  --p2p.network mocha
celestia light start --core.ip <URI> --keyring.keyname <key-name> \
  --p2p.network mocha
bash
celestia light start --core.ip <URI> --keyring.keyname <key-name> \
  --p2p.network arabica
celestia light start --core.ip <URI> --keyring.keyname <key-name> \
  --p2p.network arabica

Once you start the light node, a wallet key will be generated for you. You will need to fund that address with Mocha testnet or Arabica devnet tokens to pay for PayForBlobs transactions.

You can find the address by running the following command in the celestia-node directory:

bash
./cel-key list --node.type light --keyring-backend test --p2p.network <network>
./cel-key list --node.type light --keyring-backend test --p2p.network <network>

If you would like to fund your wallet with testnet tokens, head over to either the #mocha-faucet or #arabica-faucet channels on the Celestia Discord.

You can request funds to your wallet address using the following command in Discord:

text
$request <CELESTIA-ADDRESS>
$request <CELESTIA-ADDRESS>

Where <CELESTIA-ADDRESS> is the celestia1****** address generated when you created the wallet.

With your wallet funded, you can move on to the next step.

RPC CLI guide ​

This section of the tutorial will teach you how to interact with a Celestia node's remote procedure call (RPC) API using the command line interface (CLI).

You will need to setup dependencies, install, and run celestia-node if you have not already.

Command formatting ​

The format for interacting with the RPC CLI methods is as follows:

bash
celestia <module> <method> [args...] [flags...]
celestia <module> <method> [args...] [flags...]

Where:

  • celestia is the main command to interact with the node.
  • <module> is the specific module in the node you want to interact with, such as blob, state, p2p, etc.
  • <method> is the specific method within the module that performs the action you want, such as blob.Submit, state.AccountAddress, p2p.Info, etc.
  • [args...] represents any additional arguments that the method might require.
  • [flags...] are parameters that modify the behavior of the command. They start with -- (e.g., --node.store, --token, or --url).

For example, to submit a blob to Celestia, you can use this command once your node store is set:

:::note Previously, the node.store flag had to be specified manually for each request. This has changed in v0.14.0+ and you can read more about the implementation in celestia-node troubleshooting. :::

bash
celestia blob submit 0x42690c204d39600fddd3 'gm'
celestia blob submit 0x42690c204d39600fddd3 'gm'

TIP

Learn more about maximum blob size.

Alternatively, you could use the --token flag to set your auth token:

bash
celestia blob submit 0x42690c204d39600fddd3 'gm' --token $AUTH_TOKEN
celestia blob submit 0x42690c204d39600fddd3 'gm' --token $AUTH_TOKEN

Before you try that out, let's go over the basic flags that you will need to use when interacting with the RPC CLI. We'll also cover how to set your auth token and how to use the node store to set it.

Basic flags ​

All RPC CLI commands have basic flags that can be used to interact with the API; however, none are necessary using default configurations.

These include:

  • --node.store string - the path to root/home directory of your celestia-node store
  • --token string - authorization token for making requests
  • --url string - the address of the RPC, default is http://localhost:26658

When running RPC CLI commands, you will need to set either the authentication token or set the node store, so the auth token can be retrieved from the store.

The RPC CLI handles these flags in the following order:

  1. If user passes auth token, auth token is used.
  2. If user doesn't pass auth token, check node store flag, create token from node store, and use auth token from node store.

Auth token 🔐 ​

In order to interact with the API using RPC CLI, you will need to set the authentication token.

The --token string flag sets the authentication token. If a token is not found, authentication will not be set. And if authentication is not set, the request will fail.

To set your authentication token, you can use the following command. Be sure to replace <node-type> with the type of node and <network> with the network that you are running your node on:

bash
export AUTH_TOKEN=$(celestia <node-type> auth admin --p2p.network <network>)
export AUTH_TOKEN=$(celestia <node-type> auth admin --p2p.network <network>)

Here's an example of how to set your auth token on a light node on Arabica:

bash
export AUTH_TOKEN=$(celestia light auth admin --p2p.network arabica)
export AUTH_TOKEN=$(celestia light auth admin --p2p.network arabica)

Node store ​

In order to interact with the API using RPC CLI, you can also use your node store to set your auth token. This will allow you to interact with the API without setting an authentication token directly. This is only required if you are using a non-default node store path.

To set a custom node store for a light node on mocha-4, you can use the following command:

bash
export NODE_STORE=$HOME/your-custom-path/celestia-light-mocha-4
export NODE_STORE=$HOME/your-custom-path/celestia-light-mocha-4

Then, set the --node.store flag to the $NODE_STORE variable to set the auth token from your node store:

bash
celestia <module> <method> [args...] --node.store $NODE_STORE
celestia <module> <method> [args...] --node.store $NODE_STORE
Auth token on custom or private network ​

This section is for users who are using a CELESTIA_CUSTOM or private network.

TIP

If you are using a private and custom network with a custom node store path, you will need to set the location of the node store in your auth command.

bash
--node.store $HOME/your-custom-path/.celestia-light-private
--node.store $HOME/your-custom-path/.celestia-light-private

The above is an example from the following custom network set up with:

bash
CELESTIA_CUSTOM=private celestia light init
CELESTIA_CUSTOM=private celestia light init

or

bash
celestia light init --p2p.network private
celestia light init --p2p.network private

As an example, this is what a completely custom network would look like:

bash
# Initialize node store
CELESTIA_CUSTOM=robusta-22 celestia light init

# Set auth token
export AUTH_TOKEN=$(celestia light auth admin --p2p.network private \
  --node.store $HOME/your-custom-path/.celestia-light-robusta-22)
# Initialize node store
CELESTIA_CUSTOM=robusta-22 celestia light init

# Set auth token
export AUTH_TOKEN=$(celestia light auth admin --p2p.network private \
  --node.store $HOME/your-custom-path/.celestia-light-robusta-22)

Submitting data ​

In this example, we will be submitting a blob to the network with a blob.Submit transaction with our light node.

Some things to consider:

  • The endpoint takes in namespace and data values.
    • The commitment will be generated by the node.
    • Share version is set by the node.
  • Namespace should be 10 bytes, prefixed by 0x if hex; otherwise use base64
  • Data can be hex-encoded (0x...), base64-encoded ("..."), or a plaintext string which will be encoded to base64 ('Hello There!')
  • Optionally, user can provide a gas fee and gas limit.

We use the following namespace of 0x42690c204d39600fddd3 and the data value of 0x676d.

Here is an example of the format of the blob.Submit transaction:

bash
celestia blob submit <hex-encoded namespace> <hex-encoded data> \
  [optional: fee] [optional: gasLimit] [optional: node store | auth token]
celestia blob submit <hex-encoded namespace> <hex-encoded data> \
  [optional: fee] [optional: gasLimit] [optional: node store | auth token]

We run the following to submit a blob to the network in hexadecimal format:

bash
celestia blob submit 0x42690c204d39600fddd3 0x676d \
celestia blob submit 0x42690c204d39600fddd3 0x676d \

We get the following output:

json
{
  "result": {
    "height": 252607,
    "commitment": "0MFhYKQUi2BU+U1jxPzG7QY2BVV1lb3kiU+zAK7nUiY="
  }
}
{
  "result": {
    "height": 252607,
    "commitment": "0MFhYKQUi2BU+U1jxPzG7QY2BVV1lb3kiU+zAK7nUiY="
  }
}

We can also use a string of text as the data value, which will be converted to base64. Here is an example of the format:

bash
celestia blob submit <hex-encoded namespace> <'data'> \
  [optional: fee] [optional: gasLimit] [node store | auth token]
celestia blob submit <hex-encoded namespace> <'data'> \
  [optional: fee] [optional: gasLimit] [node store | auth token]

And an example to submit "gm" as the plain-text data:

bash
celestia blob submit 0x42690c204d39600fddd3 'gm'
celestia blob submit 0x42690c204d39600fddd3 'gm'

Output:

json
{
  "result": {
    "height": 252614,
    "commitment": "IXg+08HV5RsPF3Lle8PH+B2TUGsGUsBiseflxh6wB5E="
  }
}
{
  "result": {
    "height": 252614,
    "commitment": "IXg+08HV5RsPF3Lle8PH+B2TUGsGUsBiseflxh6wB5E="
  }
}

If you notice from the above output, it returns a result of 252614 which we will use for the next command. The result corresponds to the height of the block in which the transaction was included.

Optional: Submit with curl ​

Refer to the submitting a blob using curl section.

Retrieving data ​

After submitting your PFB transaction, upon success, the node will return the block height for which the PFB transaction was included. You can then use that block height and the namespace ID with which you submitted your PFB transaction to get your message shares (data) returned to you. In this example, the block height we got was 252614 which we will use for the following command. Read more about shares in the Celestia Specs.

Here is what an example of the format of the get command looks like:

bash
celestia blob get <block height> <hex-encoded namespace> \
  <commitment from output above> <node store | auth>
celestia blob get <block height> <hex-encoded namespace> \
  <commitment from output above> <node store | auth>

Here is an example command to retrieve the data from above, on arabica-11:

bash
celestia blob get 252614 0x42690c204d39600fddd3 IXg+08HV5RsPF3Lle8PH+B2TUGsGUsBiseflxh6wB5E=
celestia blob get 252614 0x42690c204d39600fddd3 IXg+08HV5RsPF3Lle8PH+B2TUGsGUsBiseflxh6wB5E=

Will generate the following output:

json
{
  "result": {
    "namespace": "AAAAAAAAAAAAAAAAAAAAAAAAAEJpDCBNOWAP3dM=",
    "data": "gm",
    "share_version": 0,
    "commitment": "IXg+08HV5RsPF3Lle8PH+B2TUGsGUsBiseflxh6wB5E="
  }
}
{
  "result": {
    "namespace": "AAAAAAAAAAAAAAAAAAAAAAAAAEJpDCBNOWAP3dM=",
    "data": "gm",
    "share_version": 0,
    "commitment": "IXg+08HV5RsPF3Lle8PH+B2TUGsGUsBiseflxh6wB5E="
  }
}

The output here is base64 decoded to plain-text.

To see the base64 response, use the --base64 flag set to TRUE (--base64=TRUE):

bash
celestia blob get 252614 0x42690c204d39600fddd3 IXg+08HV5RsPF3Lle8PH+B2TUGsGUsBiseflxh6wB5E= \
  --base64=TRUE
celestia blob get 252614 0x42690c204d39600fddd3 IXg+08HV5RsPF3Lle8PH+B2TUGsGUsBiseflxh6wB5E= \
  --base64=TRUE

The response will look similar to this:

json
{
  "result": {
    "namespace": "AAAAAAAAAAAAAAAAAAAAAAAAAEJpDCBNOWAP3dM=",
    "data": "Z20=",
    "share_version": 0,
    "commitment": "IXg+08HV5RsPF3Lle8PH+B2TUGsGUsBiseflxh6wB5E="
  }
}
{
  "result": {
    "namespace": "AAAAAAAAAAAAAAAAAAAAAAAAAEJpDCBNOWAP3dM=",
    "data": "Z20=",
    "share_version": 0,
    "commitment": "IXg+08HV5RsPF3Lle8PH+B2TUGsGUsBiseflxh6wB5E="
  }
}

To get all blobs in the namespace at the block height, use get-all instead of get:

bash
celestia blob get-all 252614 0x42690c204d39600fddd3
celestia blob get-all 252614 0x42690c204d39600fddd3

This will return the following:

json
{
  "result": [
    {
      "namespace": "AAAAAAAAAAAAAAAAAAAAAAAAAEJpDCBNOWAP3dM=",
      "data": "gm",
      "share_version": 0,
      "commitment": "IXg+08HV5RsPF3Lle8PH+B2TUGsGUsBiseflxh6wB5E="
    }
  ]
}
{
  "result": [
    {
      "namespace": "AAAAAAAAAAAAAAAAAAAAAAAAAEJpDCBNOWAP3dM=",
      "data": "gm",
      "share_version": 0,
      "commitment": "IXg+08HV5RsPF3Lle8PH+B2TUGsGUsBiseflxh6wB5E="
    }
  ]
}

To display the response in base64, use:

bash
celestia blob get-all 252614 0x42690c204d39600fddd3 \
  --base64=TRUE
celestia blob get-all 252614 0x42690c204d39600fddd3 \
  --base64=TRUE

Which will return:

json
{
  "result": [
    {
      "namespace": "AAAAAAAAAAAAAAAAAAAAAAAAAEJpDCBNOWAP3dM=",
      "data": "gm",
      "share_version": 0,
      "commitment": "IXg+08HV5RsPF3Lle8PH+B2TUGsGUsBiseflxh6wB5E="
    }
  ]
}
{
  "result": [
    {
      "namespace": "AAAAAAAAAAAAAAAAAAAAAAAAAEJpDCBNOWAP3dM=",
      "data": "gm",
      "share_version": 0,
      "commitment": "IXg+08HV5RsPF3Lle8PH+B2TUGsGUsBiseflxh6wB5E="
    }
  ]
}

Setting the gas price ​

The --gas.price flag allows you to specify the gas price for the submission. If not specified, a default gas price will be used. The gas limit is automatically calculated based on the size of the blob being submitted.

To set the gas price, you can use the --gas.price flag. The gas price will be set to default (0.002) if no value is passed.

Learn more about gas fees and limits.

To set a higher gas price of 0.004 utia, use the --gas.price 0.004 flag:

bash
celestia blob submit 0x42690c204d39600fddd3 'gm' --gas.price 0.004
celestia blob submit 0x42690c204d39600fddd3 'gm' --gas.price 0.004

You will receive the height and commitment of the block in which the transaction was included for these three examples:

json
{
  "result": {
    "height": 62562,
    "commitment": "IXg+08HV5RsPF3Lle8PH+B2TUGsGUsBiseflxh6wB5E="
  }
}
{
  "result": {
    "height": 62562,
    "commitment": "IXg+08HV5RsPF3Lle8PH+B2TUGsGUsBiseflxh6wB5E="
  }
}

Examples ​

Check your balance ​

Let's query our node for the balance of its default account (which is the account associated with the CELESTIA_NODE_AUTH_TOKEN key we generated above):

bash
celestia state balance
celestia state balance

The response will look similar to:

json
{
  "jsonrpc": "2.0",
  "result": {
    "denom": "utia",
    "amount": "172118057"
  },
  "id": 1
}
{
  "jsonrpc": "2.0",
  "result": {
    "denom": "utia",
    "amount": "172118057"
  },
  "id": 1
}

Check the balance of another address ​

Here is an example of the format of the balance-for-address command:

bash
celestia state balance-for-address <address>
celestia state balance-for-address <address>

Let's query our node for the balance of another address:

bash
celestia state balance-for-address celestia10rtd9lhel2cuh6c659l25yncl6atcyt37umard
celestia state balance-for-address celestia10rtd9lhel2cuh6c659l25yncl6atcyt37umard

The response will be the balance of the address you queried:

json
{
  "jsonrpc": "2.0",
  "result": {
    "denom": "utia",
    "amount": "1000000"
  },
  "id": 1
}
{
  "jsonrpc": "2.0",
  "result": {
    "denom": "utia",
    "amount": "1000000"
  },
  "id": 1
}

Get your node ID ​

This is an RPC call in order to get your node's peerId information:

bash
celestia p2p info
celestia p2p info

The node ID is in the ID value from the response:

json
{
  "jsonrpc": "2.0",
  "result": {
    "ID": "12D3KooWFFhCaAqY56oEqY3pLZUdLsv4RYAfVWKATZRepUPdosLp",
    "Addrs": [
      "/ip4/10.0.0.171/tcp/2121",
      "/ip4/10.0.0.171/udp/2121/quic-v1",
      "/ip4/71.200.65.106/tcp/25630",
      "/ip4/71.200.65.106/udp/25630/quic-v1",
      "/ip6/::1/tcp/2121",
      "/ip6/::1/udp/2121/quic-v1"
    ]
  },
  "id": 1
}
{
  "jsonrpc": "2.0",
  "result": {
    "ID": "12D3KooWFFhCaAqY56oEqY3pLZUdLsv4RYAfVWKATZRepUPdosLp",
    "Addrs": [
      "/ip4/10.0.0.171/tcp/2121",
      "/ip4/10.0.0.171/udp/2121/quic-v1",
      "/ip4/71.200.65.106/tcp/25630",
      "/ip4/71.200.65.106/udp/25630/quic-v1",
      "/ip6/::1/tcp/2121",
      "/ip6/::1/udp/2121/quic-v1"
    ]
  },
  "id": 1
}

Get your account address ​

This is an RPC call in order to get your node's account address:

bash
celestia state account-address
celestia state account-address

Response:

json
{
  "jsonrpc": "2.0",
  "result": "celestia1znk24rh52pgcd9z5x2x42jztjh6raaaphuvrt3",
  "id": 1
}
{
  "jsonrpc": "2.0",
  "result": "celestia1znk24rh52pgcd9z5x2x42jztjh6raaaphuvrt3",
  "id": 1
}

Get block header by height ​

Here is an example of the format of the GetByHeight command:

bash
celestia header get-by-height <height>
celestia header get-by-height <height>

Now, let's get the block header information.

Here we will get the header from Block 1:

bash
celestia header get-by-height 1
```

It will output something like this:

<!-- markdownlint-disable MD013 -->

```json
{
  "jsonrpc": "2.0",
  "result": {
    "header": {
      "version": {
        "block": "11",
        "app": "1"
      },
      "chain_id": "arabica-11",
      "height": "1",
      "time": "2023-06-27T13:02:39.741743Z",
      "last_block_id": {
        "hash": "",
        "parts": {
          "total": 0,
          "hash": ""
        }
      },
      "last_commit_hash": "E3B0C44298FC1C149AFBF4C8996FB92427AE41E4649B934CA495991B7852B855",
      "data_hash": "3D96B7D238E7E0456F6AF8E7CDF0A67BD6CF9C2089ECB559C659DCAA1F880353",
      "validators_hash": "6363C68770C200FD794445668F9B18F5B1DD1125180D6E8D5AB004F7DD7A0F48",
      "next_validators_hash": "6363C68770C200FD794445668F9B18F5B1DD1125180D6E8D5AB004F7DD7A0F48",
      "consensus_hash": "048091BC7DDC283F77BFBF91D73C44DA58C3DF8A9CBC867405D8B7F3DAADA22F",
      "app_hash": "E3B0C44298FC1C149AFBF4C8996FB92427AE41E4649B934CA495991B7852B855",
      "last_results_hash": "E3B0C44298FC1C149AFBF4C8996FB92427AE41E4649B934CA495991B7852B855",
      "evidence_hash": "E3B0C44298FC1C149AFBF4C8996FB92427AE41E4649B934CA495991B7852B855",
      "proposer_address": "91E04695CF9CF531BC0891E7B1D602B3E8022C86"
    },
    "validator_set": {
      "validators": [
        {
          "address": "91E04695CF9CF531BC0891E7B1D602B3E8022C86",
          "pub_key": {
            "type": "tendermint/PubKeyEd25519",
            "value": "9aNBAxno1B4X5LR2qY5qWqwrMNOzejkctXwzq9BExsg="
          },
          "voting_power": "500000000",
          "proposer_priority": "0"
        }
      ],
      "proposer": {
        "address": "91E04695CF9CF531BC0891E7B1D602B3E8022C86",
        "pub_key": {
          "type": "tendermint/PubKeyEd25519",
          "value": "9aNBAxno1B4X5LR2qY5qWqwrMNOzejkctXwzq9BExsg="
        },
        "voting_power": "500000000",
        "proposer_priority": "0"
      }
    },
    "commit": {
      "height": 1,
      "round": 0,
      "block_id": {
        "hash": "7A5FABB19713D732D967B1DA84FA0DF5E87A7B62302D783F78743E216C1A3550",
        "parts": {
          "total": 1,
          "hash": "D85C907CE660878A8203AC74BAA147CCC1F87114B45B568B72AD207B62AFE45E"
        }
      },
      "signatures": [
        {
          "block_id_flag": 2,
          "validator_address": "91E04695CF9CF531BC0891E7B1D602B3E8022C86",
          "timestamp": "2023-06-30T08:40:19.299137127Z",
          "signature": "qmaEzrnbtgEXCRYc8pCvGRbS+uMuknIBoRAE4qyE7oSgWCRwBVYS/oPReXQLg9ER1oEY1De4MkWvMjlFnQOOCg=="
        }
      ]
    },
    "dah": {
      "row_roots": [
        "//////////////////////////////////////7//////////////////////////////////////huZWOTTDmD36N1F75A9BshxNlRasCnNpQiWqIhdVHcU",
        "/////////////////////////////////////////////////////////////////////////////5iieeroHBMfF+sER3JpvROIeEJZjbY+TRE0ntADQLL3"
      ],
      "column_roots": [
        "//////////////////////////////////////7//////////////////////////////////////huZWOTTDmD36N1F75A9BshxNlRasCnNpQiWqIhdVHcU",
        "/////////////////////////////////////////////////////////////////////////////5iieeroHBMfF+sER3JpvROIeEJZjbY+TRE0ntADQLL3"
      ]
    }
  },
  "id": 1
}
celestia header get-by-height 1
```

It will output something like this:

<!-- markdownlint-disable MD013 -->

```json
{
  "jsonrpc": "2.0",
  "result": {
    "header": {
      "version": {
        "block": "11",
        "app": "1"
      },
      "chain_id": "arabica-11",
      "height": "1",
      "time": "2023-06-27T13:02:39.741743Z",
      "last_block_id": {
        "hash": "",
        "parts": {
          "total": 0,
          "hash": ""
        }
      },
      "last_commit_hash": "E3B0C44298FC1C149AFBF4C8996FB92427AE41E4649B934CA495991B7852B855",
      "data_hash": "3D96B7D238E7E0456F6AF8E7CDF0A67BD6CF9C2089ECB559C659DCAA1F880353",
      "validators_hash": "6363C68770C200FD794445668F9B18F5B1DD1125180D6E8D5AB004F7DD7A0F48",
      "next_validators_hash": "6363C68770C200FD794445668F9B18F5B1DD1125180D6E8D5AB004F7DD7A0F48",
      "consensus_hash": "048091BC7DDC283F77BFBF91D73C44DA58C3DF8A9CBC867405D8B7F3DAADA22F",
      "app_hash": "E3B0C44298FC1C149AFBF4C8996FB92427AE41E4649B934CA495991B7852B855",
      "last_results_hash": "E3B0C44298FC1C149AFBF4C8996FB92427AE41E4649B934CA495991B7852B855",
      "evidence_hash": "E3B0C44298FC1C149AFBF4C8996FB92427AE41E4649B934CA495991B7852B855",
      "proposer_address": "91E04695CF9CF531BC0891E7B1D602B3E8022C86"
    },
    "validator_set": {
      "validators": [
        {
          "address": "91E04695CF9CF531BC0891E7B1D602B3E8022C86",
          "pub_key": {
            "type": "tendermint/PubKeyEd25519",
            "value": "9aNBAxno1B4X5LR2qY5qWqwrMNOzejkctXwzq9BExsg="
          },
          "voting_power": "500000000",
          "proposer_priority": "0"
        }
      ],
      "proposer": {
        "address": "91E04695CF9CF531BC0891E7B1D602B3E8022C86",
        "pub_key": {
          "type": "tendermint/PubKeyEd25519",
          "value": "9aNBAxno1B4X5LR2qY5qWqwrMNOzejkctXwzq9BExsg="
        },
        "voting_power": "500000000",
        "proposer_priority": "0"
      }
    },
    "commit": {
      "height": 1,
      "round": 0,
      "block_id": {
        "hash": "7A5FABB19713D732D967B1DA84FA0DF5E87A7B62302D783F78743E216C1A3550",
        "parts": {
          "total": 1,
          "hash": "D85C907CE660878A8203AC74BAA147CCC1F87114B45B568B72AD207B62AFE45E"
        }
      },
      "signatures": [
        {
          "block_id_flag": 2,
          "validator_address": "91E04695CF9CF531BC0891E7B1D602B3E8022C86",
          "timestamp": "2023-06-30T08:40:19.299137127Z",
          "signature": "qmaEzrnbtgEXCRYc8pCvGRbS+uMuknIBoRAE4qyE7oSgWCRwBVYS/oPReXQLg9ER1oEY1De4MkWvMjlFnQOOCg=="
        }
      ]
    },
    "dah": {
      "row_roots": [
        "//////////////////////////////////////7//////////////////////////////////////huZWOTTDmD36N1F75A9BshxNlRasCnNpQiWqIhdVHcU",
        "/////////////////////////////////////////////////////////////////////////////5iieeroHBMfF+sER3JpvROIeEJZjbY+TRE0ntADQLL3"
      ],
      "column_roots": [
        "//////////////////////////////////////7//////////////////////////////////////huZWOTTDmD36N1F75A9BshxNlRasCnNpQiWqIhdVHcU",
        "/////////////////////////////////////////////////////////////////////////////5iieeroHBMfF+sER3JpvROIeEJZjbY+TRE0ntADQLL3"
      ]
    }
  },
  "id": 1
}

Combined commands ​

bash
celestia share get-by-namespace "$(celestia header get-by-height 147105 | jq '.result.dah' -r)" 0x42690c204d39600fddd3
celestia share get-by-namespace "$(celestia header get-by-height 147105 | jq '.result.dah' -r)" 0x42690c204d39600fddd3

Get data availability sampler stats ​

bash
celestia das sampling-stats
celestia das sampling-stats

Transfer balance of utia to another account ​

First, set your address as a variable:

bash
export ADDRESS=celestia1c425ckmve2489atttx022qpc02gxspa29wmh0d
export ADDRESS=celestia1c425ckmve2489atttx022qpc02gxspa29wmh0d

Then, transfer the amount of tokens that you would like, while setting the recipient's address, gas fee, and gasLimit. This is what the format will look like:

bash
celestia state transfer $ADDRESS <amount in utia> <gas fee in utia> <gas fee in utia>
celestia state transfer $ADDRESS <amount in utia> <gas fee in utia> <gas fee in utia>

Here is an example, sending 0.1 TIA, with a gas fee of 0.008 TIA, and a gas limit of 0.08:

bash
celestia state transfer $ADDRESS 100000 8000 80000
celestia state transfer $ADDRESS 100000 8000 80000

If you'd just like to return the transaction hash, you can use jq:

bash
celestia state transfer $ADDRESS 100000 8000 80000 | jq .result.txhash
celestia state transfer $ADDRESS 100000 8000 80000 | jq .result.txhash

API version ​

To query your node's API version, you can use the following command:

bash
celestia node info
celestia node info

Help ​

To get help and view the CLI menu, use the following command:

bash
celestia --help
celestia --help

To view the help menu for a specific method, use the following command:

bash
celestia <module> <method> --help
celestia <module> <method> --help

Advanced example ​

This example shows us using the jq command to parse the output of the celestia header get-by-height method to get the extended header used in celestia share get-by-namespace:

bash
celestia share get-by-namespace \
  "$(celestia header get-by-height 252614 | jq '.result.dah' -r)" \
  0x42690c204d39600fddd3
celestia share get-by-namespace \
  "$(celestia header get-by-height 252614 | jq '.result.dah' -r)" \
  0x42690c204d39600fddd3

Additional resources ​

Submitting a blob using curl ​

In order to post a blob using curl, you will need a light node running with the --core.ip string flag, providing access to a consensus endpoint. The flag indicates node to connect to the given core consensus node. Examples: 127.0.0.1 or subdomain.domain.tld. Using either IP or DNS assumes RPC port 26657 and gRPC port 9090 as default unless otherwise specified.

  1. In your terminal, set the auth token for the desired network. In this example, we will use Mainnet Beta.
bash
export CELESTIA_NODE_AUTH_TOKEN=$(celestia light auth admin --p2p.network celestia)
export CELESTIA_NODE_AUTH_TOKEN=$(celestia light auth admin --p2p.network celestia)
  1. Post your blob with:
bash
curl -H "Content-Type: application/json" -H "Authorization: Bearer $CELESTIA_NODE_AUTH_TOKEN" -X POST --data '{"id": 1,
  "jsonrpc": "2.0",
  "method": "blob.Submit",
  "params": [
    [
      {
        "namespace": "AAAAAAAAAAAAAAAAAAAAAAAAAAECAwQFBgcICRA=",
        "data": "VGhpcyBpcyBhbiBleGFtcGxlIG9mIHNvbWUgYmxvYiBkYXRh",
        "share_version": 0,
        "commitment": "AD5EzbG0/EMvpw0p8NIjMVnoCP4Bv6K+V6gjmwdXUKU="
      }
    ],
    0.002
  ]
}' 127.0.0.1:26658
curl -H "Content-Type: application/json" -H "Authorization: Bearer $CELESTIA_NODE_AUTH_TOKEN" -X POST --data '{"id": 1,
  "jsonrpc": "2.0",
  "method": "blob.Submit",
  "params": [
    [
      {
        "namespace": "AAAAAAAAAAAAAAAAAAAAAAAAAAECAwQFBgcICRA=",
        "data": "VGhpcyBpcyBhbiBleGFtcGxlIG9mIHNvbWUgYmxvYiBkYXRh",
        "share_version": 0,
        "commitment": "AD5EzbG0/EMvpw0p8NIjMVnoCP4Bv6K+V6gjmwdXUKU="
      }
    ],
    0.002
  ]
}' 127.0.0.1:26658
  1. Upon successful blob submission, the result will show the block height:
bash
{"jsonrpc":"2.0","result":362101,"id":1}
{"jsonrpc":"2.0","result":362101,"id":1}

The example transaction can be found on Celenium.

Post an SVG as a PFB ​

If you'd like to create your own SVG, post it to Celestia, and retrieve it, you can check out the Base64 SVG Tutorial.

Troubleshooting ​

If you encounter an error like:

sh
"rpc error: code = NotFound desc = account celestia1krkle0n547u0znz3unnln8paft2dq4z3rznv86 not found"
"rpc error: code = NotFound desc = account celestia1krkle0n547u0znz3unnln8paft2dq4z3rznv86 not found"

It is possible that the account you are trying to submit a PayForBlobs from doesn't have testnet tokens yet. Ensure the testnet faucet has funded your account with tokens and then try again.